Hi Ben, I installed the D4 rock sliders / stand-off bars on the weekend. Fitted perfectly, and a very easy process thanks to your YouTube instructions. The sliders look great and I am sure will stand up to the extremes of off-road. Thanks for a quality product. Regards, David, December 2016
Hi Ben, just took the defender for a drive after installing the new LED headlights. I haven't yet done the connections for drl or position lights, but they were so simple to install. And they work brilliantly. Thanks for the advice and tips. I'm very happy with the result. Grant, January 2017
Hi Ben, the bar [bullbar] arrived this morning and was fitted in about 50 minutes with no problems at all. An excellent product. It's also much better than the farm gate bull bar that was on there when I purchased the vehicle. April, 2017
Hi Ben, I just fitted the steering guard I purchased two weeks ago and I must say that's a good bit of kit. It's extremely well made and fitted perfectly. Ross, March 2017
Thanks Ben, It took longer to watch your video than to install the guard. All too easy. Regards Ron Feb 2017
Thanks Ben, appreciate the good service. Darren, February 2017
Hi Ben, Just finished installing the Sliders. They look really great and very happy with them. Jay, November 2016
Hi Ben, arrived very quickly and installed as you quite rightly say very simply, no hassles. Thanks for pointing out the wombat bar stinky water :-) David, November 2016
On the weekend I was out 4wding and put your steering and diff guard to the test yet again. I've been super impressed with both these products, they're bloody tough! Anyway, coming up to one big rock ledge I absolutely smashed the front end into a big rock that I didn't see (whoops). It put a decent dent in the bull bar and only slightly bent the steering guard - pretty impressive considering the hit it took. All considered I'd definitely recommend your products to others, they're top notch. Sean, April 2017
Hi Ben, Thank you for your prompt and informative reply. It's not very often that Australian (and some overseas) business provide; 1) a reply at all; and, 2) an answer to the actual question(s) asked, let alone a proper technical reply covering all aspects of a "potential" customer enquiry. To show my support for your business; today I am going to order - front and rear diff guards for my D2, with future guard orders to follow as funds permit including trans guard when available. Best regards, Scott, September 2016
All the parts you have supplied have been brilliant, your reputation is well-earned! … They have performed above and beyond the call of duty, usually as a result of being the guy running 33s in a group of big trucks running 35"+ they end up seeing a fair few track centres! … The steering guard is lovely, frequently complimented. … Rest assured your gear gets to see a lot of tricky terrain down here in Tassie! Steve H, August 2016
Hi Ben, Thanks for the email! It's not often you get a personalised email to confirm shipment these days, that’s what I call customer service! Looking forward to fitting my track rod and drag link (the one I bought back in April?, still haven't put it on yet.... Cheers Nick, September 2016
Hello Ben, Forgot to let you know that this item arrived safely and was fitted without difficulty. Appreciate the service. Regards, Keith, September 2016
Hi Ben, Thanks for the instructions, sure makes life easier. I’m sure most of your catalogue will be on my defender eventually, your products look top notch. Looking forward to installing the new toys, Regards Sean, October 2016
Evening package arrived today, was on door step when I got home, fitted this evening, only took 10 minutes. Major improvement, thanks. Really impressed at quality for about half what it costs here for UK imports. Even customs helped by not taking arbitrary slice. Regards, Gordon, November 2016
Hi Ben, Just finished installing the Sliders. They look really great and very happy with them. Jay, November 2016
Thx Ben, got them on easy thanks to you video they [Discovery 4 Rock Sliders] look great. November 2016
Great service. Thank you Ben, I'll make sure I give you a plug on AULRO. Best wishes mate. Ken, November 2016
Hi Ben, The new coils are great and work a treat. No more dislocation. George, September 2016
Thank you Ben. Excellent video on instructions as well! Peter, September 2016
Thanks for the bullbar, only took about 20 mins to install, looks great, thanks. - Shaun, July 2016
I am really happy with the product you provided, everything fits perfectly and I will definitely recommend your products to other disco owners. - Dave, August 2016
I installed the rock sliders today. Just wanted to say thanks. Another disco owner stopped to have a look and ask where I got them from while I was installing them. So I told him your website and said I was very happy and was a fast delivery. - Mark, August 2016
I finally got time today to install your steering guard and front diff guard. I dig them a lot. Fitted just like your YouTube vids. Ta mate! Rear diff guard will be next. - Paul, August 2016
All done, very happy! Thanks for everything. - Ben, May 2016
Thanks Ben. Excellent service! - Phil, June 2016
Finally found the time to fit it last week. Fits perfectly, thanks. I'll definitely keep you in mind for more upgrades in the future. Thanks again for your great service. - Mark, July 2016
Thanks Ben. You were right - very easy to fit - took about 45 mins and looks great. - Rhett, July 2016
Thanks for taking the time yesterday to discuss accessory options for my Defender. Thank you for the accessories. The fuel cooler guard went on in less than 15 minutes! - Zenon, December 2015
Thank you Ben pleasure to deal with as before. - Richard, January 2016
Thanks for the great service Ben. They look great. Only took me an hour to bolt on. - Morry, March 2016
I am really pleased with the product and the end result. - Grant, May 2016
Just to let you know parts arrived today. Love the red. Thank you for your excellent customer service. - Jim, October 2015
Yes the steering guard looks great as well functional, A little bit of mucking around, as I had an ARB bull bar to push out forward, only if I had looked at your products first instead of listening to mates that say this is good without really knowing. But now I know where to find APT products, and the quality and services you provide will see us again. - David & Leonie, October 2015
Thanks for the quick shipping, great service and excellent steering guard. Installation was a breeze, even around the big bullbar mounting plate. Keep up the great work. Cheers. - Keith, October 2015
Thanks for the steering guard. Really appreciate your service, quality and support. - Paul, November 2015
Thanks so much for you great service, a pleasure to deal with you. I will highly recommend you to fellow Land rover owners. - Anthony C, September 2014
We are very happy with our Disco 1 flares from APT. They look a treat and are solid and fitted up very nicely. Thanks heaps guys. - Marek, July 2014
These slider diff guards are a top bit of kit, easy to fit and well made. Ten out of ten to Ben at APT. - Andy, July 2014
Great service great products highly recommended! My yellow 90 will be one of his most visited customers – Raemen C, May 2014
I can't 2 wait to get more of your beaut kit under by 110 - James D, May 2014
Thanks Ben, been a pleasure dealing with you. - Jackson, January 2014
Thanks for the great service Ben, looking forward to getting them on! Give me a week or two and l will be in touch for a set of fronts. - Tony, January 2014
Just fitted some stubby sliders to my Disco 1! Very happy with the service and the product! - Steley B, April 2014
If you want high quality gear for your Landrover and Australian made, talk to Ben. Thanks for the diff guard Ben. Gavin L, December 2013
Steering guard turned up other day. Installed in 20 mins today. Very nice bit of gear. Also, many thanks for your outstanding customer service. Thanks again. – Brendon, February 2014
Hey Ben, sliders look awesome, very sturdy. So good to see a local business making high quality products at very reasonable prices. Thanks for your work feel free to use the attached pics for your website. Thanks again. - Ben R, November 2013
Thanks again Ben! Great service from you guys, will definitely recommend. - Lewis, April 2014
G'day Ben! Wanted to let you know that I’m very happy with the new steering guard!! - Ben C, April 2014
Hi Ben. The guard was received today. Looks good. Thanks. – Graeme, March 2104
Ben fitted a bash plate to my defender recently. Great job and good quality product. Highly recommended. Paul B, March 2014
My son got me a steering guard for my Disco 2. Very happy with it. Andrew S, March 2014
Great Aussie business, high quality products which I have personally bought! A+ Ben R, November 2013
Thanks for the quick processing of my order, really appreciated. – Ross, February 2014
Order received and now fitted. Thank you for your great service. – Krys, February 2014
I actually fitted the arms up that evening, and I think it rates as one of the easiest jobs I've ever done on the old Deefer! The arms look a treat and I am very impressed with them. Based on the quality of these arms I will be back in contact soon regarding a few other bit and pieces. - Peter, February 2014
Picked up my Disco 2 this afternoon from APT! Looks absolutely awesome with new sliders and flares! Highly recommend these guys to anyone. Needless to say my truck will be back up to these guys for some more mods soon! - Sean G, June 2014
Finally had some spare time and fitted the Disco steering guard over the Easter w/e. Just wanted to say it was a very straightforward install and I was really impressed with the good design and quality of materials provided. Great product keep up the good work. - Andy, April 2014
Just wanted to let you know that I finally managed to get both diff guards attached to my Disco 1 and successfully tested the truck on the Monkey Gum trail a short while ago. Performed admirably. But more importantly wanted to commend you on the design of the forward diff guard you provided. Your guard is the only one that allows the harmonic balancer to be refitted where the other versions required it to be left off or cut to fit. I reversed the steering damper the other way round which allowed it to slot into place and seems to have worked so far.
We have used various fabrications on our last three Land Rovers....a Disco 3, Puma Defender and our current Discovery 2. Each vehicle had a three inch stainless APT exhaust fitted with various under body protection plates. The Disco 2 has a superbly manufactured rear steel bumper and front recovery points. Ben also supplied one of his exhaust manifolds for the TD5 and fitted a larger intercooler which has reduced both engine and exhaust gas temperatures. A turbo boost module and performance chip were also needed to optimise this mod. We have found APT very professional with quality products all engineered to high standards and with fair pricing. We thoroughly recommend Ben for all your Land Rover fabrication needs. John Grimsey
Thanks again and once I have saved up I will get in an order for sliders and a steering guard. Regards, Crawford
Great price. Great service! Wendy
Thanks Ben, great service and price. As I love my Disco, but know she will always need some kind of TLC I’m sure we will be doing more trade in the future. - Ian
Ben, Thank you again for all your help. The steering guard is holding up well, and I love the HIDs! Will be back for more. - James
Hi Ben, I received the steering guard this morning, only took twenty minutes to take off the factory bar and install the new guard. I am very pleased with the quality of your product. Regards, Mike
I just want to thank Ben at APT for the great advice and service on my Disco 1. The handling of the vehicle has been transformed with the APT suspension upgrade. We also have the added confidence of knowing we are protected by the steering and diff guard. Our night driving comfort and safety has been greatly improved with the addition of the H4 plus 100 headlights and the HID spot lights.
I found out about APT''s products through my Land Rover club. I had seen a number of Ben's rear bumpers on a few of the members vehicles and was impressed with the quality and finish. I contacted Ben initially about getting a steering guard for my Discovery and was stoked with the fit and design. Since then, I have always found Ben happy to talk about modifying or personalising his products for my needs, or designing something from scratch if need be. His background in offroad racing is apparent when contributing his own slant to my requirements and willing to listen to my ideas for equipment - achieving a better solution for me. I can't wait to see what he will come up with next. Cheers, Matthew Johns